Terminal Units Selector

Steam or Hot Water Unit Heaters

Wed, 16 Mar 2016 21:09:20 GMT

Vulcan Hydronic Heating Equipment Division

Vulcan Heating Equipment has had broad experience in the manufacture of steam/hot water unit heaters for many years.

Offered in both horizontal and vertical air delivery models, Vulcan unit heaters are a complete heat distributing plant, encased in an attractive, streamlined baked enamel housing. Designed for ceiling mounting, they provide a convenient, low cost method of heating warehouses, stores, factories, and other large open areas.

Vulcan, responding to the requirements of the heating industry, has now expanded its unit heater line to one of the most complete in the industry, twenty-three horizontal and fifteen vertical steam/hot water models!

Most Vulcan unit heaters are equipped with totally enclosed motors with internal thermal overload, statically and dynamically balanced fans for quiet operation, and with the installer in mind, we designed a versatile hanging system for easy installation! Vulcan horizontal unit heaters are attractively finished in dark gray jackets with light gray air deflection louvers.

Vulcan is proud of the reputation it has earned in the hydronic heating equipment market for product quality, design, innovations and customer service. The corporation has pledged its full range of engineering and manufacturing resources toward maintaining an unwavering commitment to the steam/hot water heating equipment industry.

Convectors

Wed, 16 Mar 2016 21:07:43 GMT

Convector Radiation

Vulcan Convectors are engineered for both forced hot water and two-pipe steam heating system installation with heating elements of lightweight non-ferrous construction. They are available in (7) basic types to meet a wide range of heating applications in institutional buildings, hospitals, hotels, office buildings, schools, apartments and other structures. A variety of cabinet enclosure styles permits the selection of an attractive and functional installation to blend with any building interior - modem or traditional. Designed for maximum flexibility of installation arrangement, Vulcan Convectors are available in free-standing, semi-recessed, wall-hung and fully recessed models. Enclosures are formed from heavy-gauge steel, and finished in a prime coat suitable for field painting, or in any of the decorator colors on the Vulcan Color Chart.

Type FS-A/FSG-A:

The type FS-A Free-Standing Cabinet Enclosure is designed to be used exposed and fitted flush against the wall. Readily installed without alteration of wall interior, The FS-A enclosure is frequently used for system modernization where it is desirable to avoid the expense of recessing the unit in the wall. Arched inlet shown is standard. Unit may be provided with integral inlet grille,(FSG-A).

Type W-A:

The W-A Convector is a completely exposed wall hung unit with flat top. Outlet grille is in the face of the enclosure. Enclosure front wraps around unit and fastens to sides of cabinet with clips. Air inlet is through open bottom of unit enclosure.

Type SR-A/SRG-A Semi-Recessed:

Cabinet design is similar to FS-A model. Enclosure projects only 2 1/4" from wall, Complete unit includes enclosure, front panel with outlet grille and arched inlet opening, heating element. Front panel is easily removed for cleaning or access to heating element. Unit may be provided with integral inlet grille, (SRG-A).

Type PW-A/PWG-A

This is a partially recessed unit with rounded flange front and venetian type air outlet grille, standard for wall mounting as illustrated. Cabinet extends only 2 1/4 " from wall. Enclosure front fastens and screws to brackets on unit liner installed in wall recess. Air inlet is through open bottom of unit (PW-A). Unit may be provided with integral inlet grille, (PWG-A).

Type SF-A/SFG-A:

The Type SFA Free-Standing Cabinet Enclosure is designed to be used exposed and fitted flush against the wall. Readily installed without alteration of wall interior, the SF A enclosure is frequently used for system modernization where it is desirable to avoid the expense of recessing the unit in the wall. Arched inlet shown is standard. Unit may be provided with integral inlet grille,(SFG-A).

Type SW-A:

This model is fully exposed wall hung with outlet grille located in sloping top. Enclosure wraps around unit and fastens to sides with clips. Air inlet is through open bottom of unit. Slope of top is 30°. Consult factory for availability with stainless steel.

Type RF-A/FRG-A & FWG-A:

Designed to be fully recessed within the wall. The flanged edge metal front contains the outlet grille and inlet opening and is fastened by screws. It is easily removable for heating element access. The standard unit is arranged for floor mounting with arched inlet opening, (RF-A). Unit may be provided with integral inlet grille (RFG-A shown). TYPE FWG-A unit is similar, but for wall mounting with integral inlet grille. All units extend 13/16" from wall. Consult factory for availability of FWG-A models in stainless steel.

Cabinet Unit Heaters

Wed, 16 Mar 2016 20:50:10 GMT

Selection and "Rough In" Made Easy - Only the Lengths Vary

The Vulcan Cabinet Unit Heater is the industry’s most recent design. Years of manufacturing and engineering experience combined with a concern for appearance have resulted in a crisply styled unit that will blend with almost any room decor and provide reliability, durability, individual control and quiet operation. The wide selection of floor, wall and ceiling units with a variety of air flow arrangements allows for exactly matching design requirements. Field repainting to match the decor is possible and factory applied decorator colors are available as an option. Recessed models are provided with a field installed wall seal that allows for full or partial recessing depending on the model. The wall seal is also available as an optional kit for full or partial recessing of most other models.

As unit size increases, only the length changes. The depth and height remain constant, thus allowing the designer to have uniformity of appearance when units of various sizes are installed in adjacent areas. The standard 16 gauge front panel is rugged enough to withstand harsh treatment. Exposed cabinetry is provided with a neutral eggshell baked enamel. Back and side panels are 18 gauge. The pedestal base for floor models is painted to match the unit and is the height of most mop boards. The solid state speed control provides infinite variations from high to low speed, giving the occupant finger-tip control over fan speed and room temperature.

Vulcan Cabinet Unit Heaters are CSA certified.